STPSO Jail Roof Replacement – Buildings A, B and C ------The Contractor must provide all labor, equipment, materials, and tools necessary for removal and disposal of existing roofing system on buildings A, B, and C.The Contractor must install new torch applied SBS modified bitumen membrane roofing system per the construction drawings and specifications.

Camp Salmen and Koop Drive Trail Head - Fitness Court Slabs-----------------------This project is for the installation of (2) concrete slabs as part of the National Fitness Campaign (NFC) - Outdoor Fitness Courts. Locations are Camp Salmen Nature Park and Tammany Trace (Koop Drive), St. Tammany Parish, LA.

Blackwell Drive---------------------------------------------------------------------The Parish requests a contractor for the turning radius to be widened and improved as specified on Blackwell Dr. (R04E021) at Louand Dr. (R04E18) Section 7 Township 8S Range 11E,Lacombe, LA. 70445.

Cherry Laurel Drainage/Curb Repair----Contractor must provide all labor, materials, tools, supervision, and equipment to remove/replace concrete driveway, curb and gutter specified on Cherry Laurel (R04A032; S37-T7-R11) located in Covington, Louisiana. The time period of completion is thirty (30) days from the issuance of the Notice to Proceed by the Parish. Any work that may be reasonably inferred from the specifications or drawings as being required to produce the intended result shall be supplied whether or not it is specifically called for. Work, materials or equipment described herein which so applied to this project are covered by a well-known technical meaning or specification shall be deemed to be governed by such recognized standards unless specifically excluded. If the contractor has not done business with the Parish, the contractor should submit a W-9 with their response.

Installation of Fuel Tanks and Removal of the Existing Fuel Tanks at Department of Public Works Facilities--------To supply all equipment, materials, and labor to place two (2) five thousand (5,000) gallon above ground fuel tanks at each location with all required equipment to supply diesel fuel and unleaded gasoline for governmental equipment usage. Requirements: •Submit all fire marshal paperwork for the scope of work for the project. •Form up a properly sized concrete footing for tank saddlers with welded anchoring. •Install bollards for each tank that is properly sized and meets all regulations. •Pour tank pad and bollards with four thousand (4,000) PSI ready mix concrete. •Supply and install two (2) five thousand (5,000) gallon cylinder Fireguard UL2085, or equal, above ground fuel tank with all required fittings and piping from the fuel tank to the fuel delivery system or approved equal per location. If not biding as specified, specify Make/Model: __________________________________ •Properly ground the fuel tank •Supply and install split containment and overfill protection. •Supply and install a Green Leaf Gauge, or equal, level gauge. If not biding as specified, specify Make/Model: __________________________________ •Install a cap to manually test the fuel level. •Supply an atmospheric vent cap to meet regulations. •Connect and modify to existing fuel delivery system for complete/functional installation comparable with Petrovend software that communicates with Phoenix fuel system. •All waste/debris will be removed from the site and disposed of properly by the completion of the job. •All work should be Monday thru Friday between 7 am and 3 pm unless prior approval from DPW Director. •All equipment shall have a minimum one (1) year manufacturer’s warranty. Workmanship shall be covered by a one (1) year warranty for all installation work. This project time will be for ninety (90) calendar days.